TP-Link TL-WR940N User Manual page 26

Chapter 4
• MTU Size
the default MTU size unless required by your ISP.
• Service Name/AC Name
should not be configured unless you are sure it is necessary for your ISP. In most
cases, leaving these fields blank will work.
• ISP Specified IP Address
the router, please select
provided by your ISP in dotted-decimal notation.
• Detect Online Interval
interval. The default value is 0. You can input the value between 0 and 120. The value
0 means no detect.
• Primary DNS/Secondary DNS
addresses to the router, please select
address in dotted-decimal notation of your ISP's primary DNS server. If a secondary
DNS server address is available, enter it as well.
BigPond Cable
If your ISP provides BigPond cable connection, please select
Downloaded from ManualsNet.com
- The default MTU size is 1480 bytes. It is not recommended that you change
- The service name and AC (Access Concentrator) name
- If your ISP does not automatically assign IP addresses to
Use IP address specified by ISP
- The router will detect Access Concentrator online at every
search engine
Configure the Router in Standard Wireless Router
- If your ISP does not automatically assign DNS
Use the following DNS servers
and enter the IP address
and enter the IP
BigPond Cable.
21