Firmware Upgrade; Factory Defaults - TP-Link TL-WR940N User Manual

Chapter 6
• Enable
• IP Address
sending ping packets.
• Interval
• Delay
• Fail Count
value is overrun, the router will restart automatically.
6. 6. 3.
TP-Link is dedicated to improving and richening the product features, giving users
a better network experience. We will release the latest firmware at TP-Link official
website. You can download the latest firmware file from the
www.tp-link.com
1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
3. Go to
4. Click
6. 6. 4.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
Downloaded from ManualsNet.com
- Turn on/off Ping Watch Dog.
- The IP address of the target host where the Ping Watch Dog Utility is
- Time interval between two ping packets which are sent out continuously.
- Time delay before first ping packet is sent out when the router is restarted.
- Upper limit of the ping packets the router can drop continuously. If this

Firmware Upgrade

and upgrade the firmware to the latest version.
System Tools > Firmware
Browse to locate the downloaded firmware file, and click Upgrade.

Factory Defaults

search engine
Configure the Router in Repeater Mode
Upgrade.
Support page of our website
108