TP-Link TL-WR940N User Manual page 25

Chapter 4
• User Name/Password
These fields are case-sensitive.
• Confirm Password
password you entered is correct.
• Secondary Connection
an extra connection type, select
connection.
• WAN Connection Mode
•
•
•
•
Note:
• Only when you have configured the system time on the
based connecting function take effect.
• Sometimes the connection cannot be terminated although you have specified the
some applications are visiting the internet continually in the background.
If you want to do some advanced configurations, please click Advanced.
Downloaded from ManualsNet.com
- Enter the user name and password provided by your ISP.
- Enter the Password provided by your ISP again to ensure the
- It's available only for PPPoE connection. If your ISP provides
Connect on Demand - In this mode, the internet connection can be terminated
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
Connect Automatically
when it is down.
Time-based Connecting
from the start time to the end time (both are in HH:MM format).
Connect Manually - You can click
immediately. This mode also supports the
on Demand mode. The internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
search engine
Configure the Router in Standard Wireless Router
Dynamic IP or Static IP
- The connection can be re-established automatically
- The connection will only be established in the period
Connect/Disconnect
Max Idle Time
System Tools
to activate the secondary
Max Idle Time
to connect/disconnect
function as Connect
> Time Settings page, will the time-
Max Idle Time because
20