Chapter 5
5. 5. 2.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Configure the security settings of your wireless network and click Save.
•
Disable Security
disabled, wireless clients can connect to the router without a password. It's strongly
recommended to choose one of the following modes to enable security.
•
WPA-PSK/WPA2-Personal
shared passphrase.
•
•
•
•
•
WPA /WPA2-Enterprise
Downloaded from
ManualsNet.com
Wireless Security
Wireless
>
Wireless
Security.
- The wireless security function can be enabled or disabled. If
- It's the WPA/WPA2 authentication type based on pre-
Version
- Select Automatic,
Encryption
- Select Automatic,
Wireless Password
- Enter ASCII or Hexadecimal characters. For Hexadecimal,
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
Group Key Update Period
The value can be 0 or at least 30. Enter 0 to disable the update.
- It's based on Radius Server.
search engine
Configure the Router in Access Point Mode
WPA-PSK
or WPA2-PSK.
TKIP
or AES.
- Specify the group key update interval in seconds.
79