TP-Link TL-WR940N User Manual page 64

Chapter 4
•
•
•
•
•
Note:
If you get "Address not found error" when you access a web site, it is likely that your DNS servers are set up
improperly. You should contact your ISP to get DNS server addresses.
DHCPv6
•
•
•
•
•
Downloaded from ManualsNet.com
Default Gateway - Display the default gateway in colon-hexadecimal notation
provided by your ISP.
Connect - Click Connect
Disconnect - Click Disconnect
Get IPv6 DNS Server Automatically
address, keep the default selection
DNS servers will be assigned from ISP dynamically.
• Primary IPv6 DNS
notation provided by your ISP.
• Secondary IPv6 DNS
hexadecimal notation provided by your ISP.
Use the following IPv6 DNS Servers
addresses, select Use the following IPv6 DNS Servers
IPv6 DNS and Secondary IPv6 DNS
IPv6 Address - The IPv6 address assigned by your ISP dynamically.
Default Gateway - Display the default gateway in colon-hexadecimal notation
provided by your ISP.
Renew - Click Renew to renew the IPv6 parameters from your ISP.
Release - Click Release
Get IPv6 DNS Server Automatically
address, keep the default selection
DNS servers will be assigned from ISP dynamically.
search engine
Configure the Router in Standard Wireless Router
to connect immediately.
to disconnect immediately.
- If your ISP does not give you any DNS IPv6
Get IPv6 DNS Server
- Enter the DNS IPv6 address in colon-hexadecimal
- Enter another DNS IPv6 address
- If your ISP gives you one or two DNS IPv6
in the corresponding fields.
to release the IPv6 parameters from your ISP.
- If your ISP does not give you any DNS IPv6
Get IPv6 DNS Server
Automatically, and the
in colon-
and enter the Primary
Automatically, and the
59