TP-Link TL-WR940N User Manual page 65

Chapter 4
•
Note:
If you get "Address not found error" when you access a web site, it is likely that your DNS servers are set up
improperly. You should contact your ISP to get DNS server addresses.
Static IPv6
•
•
•
•
•
Downloaded from ManualsNet.com
• Primary IPv6 DNS
notation provided by your ISP.
• Secondary IPv6 DNS
hexadecimal notation provided by your ISP.
Use the following IPv6 DNS Servers
addresses, select Use the following IPv6 DNS Servers
IPv6 DNS and Secondary IPv6 DNS
IPv6 Address - Enter the IPv6 address in colon-hexadecimal notation provided
by your ISP.
Default Gateway - Enter the default gateway in colon-hexadecimal notation
provided by your ISP.
MTU Size (in bytes) - The normal MTU (Maximum Transmission Unit) value for
most Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify
the MTU. But this is rarely required, and should not be done unless you are sure
it is necessary for your ISP connection.
Primary DNS - Enter the DNS IPv6 address in colon-hexadecimal notation
provided by your ISP.
Secondary DNS - Enter another DNS IPv6 address in colon-hexadecimal
notation provided by your ISP.
search engine
Configure the Router in Standard Wireless Router
- Enter the DNS IPv6 address in colon-hexadecimal
- Enter another DNS IPv6 address in colon-
- If your ISP gives you one or two DNS IPv6
in the corresponding fields.
and enter the Primary
60