Dhcp - TP-Link TL-WR940N User Manual

Chapter 4
7. Click Save.
•
•
•
•
•
•
•
•
Note:
The range of bandwidth for guest network is calculated according to the setting of Bandwidth Control on the
Bandwidth Control
4. 7.
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
Downloaded from ManualsNet.com
Allow Guest To Access My Local Network
local network and manage it.
Enable Guest Network Bandwidth Control
Bandwidth Control rules will take effect.
Egress Bandwidth For Guest Network
port for the guest network.
Ingress Bandwidth For Guest Network
port for the guest network.
Guest Network - Enable or disable this function.
Network Name - Enter a value of up to 32 characters. The Network Name (SSID)
must be assigned to all wireless devices in your guest network.
Wireless Security - You can configure the security of the guest network.
Access Time - During this peroid the wireless devices can access the guest
network.
> Control Settings

DHCP

search engine
Configure the Router in Standard Wireless Router
- If enabled, guests can access the
- If enabled, the Guest Network
- The upload speed through the WAN
- The download speed through the WAN
page.
34