Chapter 5
2. Go to
3. Configure the basic settings for the wireless network and click Save.
•
Wireless Network Name
TP-Link_XXXX (XXXX indicates the last unique four numbers of each router's MAC
address). It is strongly recommended that you change your network name (SSID). This
value is case-sensitive. For example, TEST is NOT the same as test.
•
Channel
channel is set to Auto. It is not necessary to change the wireless channel unless you
notice interference problems with another nearby access point.
•
Mode
default setting
the router.
Note:
If 11bg mixed mode is selected, the
changed.
•
Channel Width
is Auto, which can automatically adjust the channel width for your clients.
•
Enable Wireless Radio
to allow or deny wireless access. If enabled, the wireless clients will be able to access
the router.
•
Enable SSID Broadcast
name (SSID).
Downloaded from
ManualsNet.com
Wireless
>
Wireless
Settings.
- Enter a string of up to 32 characters. The default SSID is
- This field determines which operating frequency will be used. The default
- Select the desired mode. It is strongly recommended that you keep the
11bgn
mixed, so that all 802.11b/g/n wireless devices can connect to
Channel Width
- Select any channel width from the drop-down list. The default setting
- The wireless radio of the router can be enabled or disabled
- If enabled, the router will broadcast the wireless network
search engine
Configure the Router in Access Point Mode
field will turn gray and the value will become 20M and cannot be
78