TP-Link TL-WR940N User Manual page 80

Chapter 5
2. Select
3. Within two minutes, press the WPS button on your client device.
4. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Method TWO: Enter the Client's PIN
1. Keep the WPS Status as
2. Select
filed and click Connect.
3. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Downloaded from ManualsNet.com
Press the button of the new device in two minutes
Enabled
Enter the new device's
search engine
Configure the Router in Access Point Mode
and click Add Device.
PIN, enter your client device's current PIN in the
and click Connect.
PIN
75