System Tools; Diagnostic - TP-Link TL-WR940N User Manual

Chapter 6
1 ) Enter the MAC address (in XX-XX-XX-XX-XX-XX format) of the client for which
2 ) Enter the IP address (in dotted-decimal notation) which you want to reserve for
3 ) Leave the status as Enabled.
4 ) Click Save.
6. 6.
6. 6. 1.
Diagnostic is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
• Diagnostic Tool
Downloaded from ManualsNet.com
you want to reserve an IP address.
the client.

System Tools

Diagnostic

System Tools > Diagnostic.
- Select one diagnostic tool.
search engine
Configure the Router in Repeater Mode
106