TP-Link TL-WR940N User Manual page 48

Chapter 4
2. Go to
attacked by ICMP-Flood, UDP Flood and TCP-SYN Flood.
• Packets Statistics Interval (5~60)
5 and 60 seconds from the drop-down list. The
indicates the time section of the packets statistics. The result of the statistics is used
for analysis by SYN Flood, UDP Flood and ICMP-Flood.
• DoS Protection
disable the DoS protection function. Only when it is enabled, will the flood filters be
enabled.
Note:
Dos Protection will take effect only when the Statistics in
• Enable ICMP-FLOOD Attack Filtering
• ICMP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current ICMP-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
• Enable UDP-FLOOD Filtering
• UDP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current UPD-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
• Enable TCP-SYN-FLOOD Attack Filtering
function.
Downloaded from ManualsNet.com
Security > Advanced
- Denial of Service protection. Select Enable or Disable to enable or
- Check the box to enable or disable this function.
search engine
Configure the Router in Standard Wireless Router
Security, and you can protect the router from being
- The default value is 10. Select a value between
Packets Statistics Interval
System Tool > Statistics
-Check the box to enable or disable this function.
- The default value is 50. Enter a value
- The default value is 500. Enter a value
-Check the box to enable or disable this
value
is enabled.
43