TP-Link TL-WR940N User Manual page 24

450mbps wireless n router
Hide thumbs Also See for TL-WR940N:
Table of Contents

Advertisement

Chapter 4
Static IP
If your ISP provides a static or fixed IP address, subnet mask, default gateway and DNS
setting, please select
IP Address
Subnet Mask
ISP. Normally 255.255.255.0 is used as the subnet mask.
Default Gateway
by your ISP.
MTU Size
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
Primary/Secondary DNS
decimal notation provided by your ISP.
PPPoE/Russia PPPoE
If your ISP provides PPPoE connection, select
Downloaded from
ManualsNet.com
Static
IP.
- Enter the IP address in dotted-decimal notation provided by your ISP.
- Enter the subnet mask in dotted-decimal notation provided by your
- Enter the gateway IP address in dotted-decimal notation provided
- The normal MTU (Maximum Transmission Unit) value for most Ethernet
- (Optional) Enter one or two DNS addresses in dotted-
search engine
Configure the Router in Standard Wireless Router
PPPoE/Russia
PPPoE.
19

Advertisement

Table of Contents
loading

Table of Contents