TP-Link TL-WR940N User Manual page 86

Chapter 5
How can I
do that?
Done!
Downloaded from ManualsNet.com
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to
3. Click
4. Select
the list to access
5. Delete all or disable all entries if there are any entries already.
6. Click
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-
00-07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select
4 ) Click
7. The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
search engine
Configure the Router in Access Point Mode
Wireless > Wireless MAC
Enable to enable the Wireless MAC Filtering function.
Allow the stations specified by any enabled entries in
as the filtering rule.
Add New and fill in the blank.
Enabled in the Status drop-down list.
Save and click Back.
Filtering.
81