Dhcp; Dhcp Settings - TP-Link TL-WR940N User Manual

Chapter 5
• Rate
• Run Time
• Transmit
• Receive
Click Start
5. 6.
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary,
and you can reserve LAN IP addresses for specified client devices.
5. 6. 1.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Specify DHCP server settings and click Save.
Downloaded from ManualsNet.com
- The unit for the Throughput.
- How long the Throughput Monitor runs.
- Wireless transmit rate information.
- Wireless receive rate information.
/ Stop to start or stop wireless throughput monitor.

DHCP

DHCP Settings

DHCP > DHCP Settings.
search engine
Configure the Router in Access Point Mode
84