Ipv6 Support; Ipv6 Status; Ipv6 Setup - TP-Link TL-WR940N User Manual

Chapter 4
4. Click Login.
5. Click Save.
• Connection Status
• Logout

4. 16. IPv6 Support

This function allows you to enable IPv6 function and set up the parameters of the
router's Wide Area Network (WAN) and Local Area Network (LAN).

4. 16. 1. IPv6 Status

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
information of the router.
• WAN -
including
IPv6 DNS
• LAN -
including

4. 16. 2. IPv6 Setup

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Downloaded from ManualsNet.com
- The status of the DDNS service connection is displayed here.
- Click Logout to log out of the DDNS service.
IPv6 Support > IPv6
This section shows the current IPv6 information of the router's WAN port,
Connection Type, IPv6 Address
and Secondary IPv6
This section shows the current IPv6 information of the router's LAN port,
IPv6 Address Assign
IPv6 Support > IPv6 Setup.
search engine
Configure the Router in Standard Wireless Router
Status, and you can view the current IPv6 status
information,
DNS.
Type, IPv6 Address and
IPv6 Default Gateway, Primary
Link-local Address.
57