Mac Clone - TP-Link TL-WR940N User Manual

450mbps wireless n router
Hide thumbs Also See for TL-WR940N:
Table of Contents

Advertisement

Chapter 4
Confirm Password
password you entered is correct.
Connect/Disconnect
Dynamic IP/ Static IP
please enter the IP address, subnet marsk, gateway and DNS also provided by your
ISP.
Internet IP Address/ Internet DNS
assigned by L2TP server.
Connection Mode
Note:
Sometimes the connection cannot be terminated although you have specified the
applications are visiting the internet continually in the background.
4. 4. 2.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Configure the WAN MAC address and click Save.
WAN MAC Address
If your ISP requires you to register the MAC address, please enter the correct MAC
Downloaded from
ManualsNet.com
- Enter the Password provided by your ISP again to ensure the
- Click this button to connect or disconnect immediately.
- Select either as required by your ISP. If
Connect on Demand
- In this mode, the internet connection can be terminated
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
Connect Automatically
when it is down.
Connect Manually
- You can click
immediately. This mode also supports the
on Demand
mode. The internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.

MAC Clone

Network
>
MAC
Clone.
- This field displays the current MAC address of the WAN port.
search engine
Configure the Router in Standard Wireless Router
- The internet IP address and DNS server address
- The connection can be re-established automatically
Connect/Disconnect
Max Idle Time
Static IP
is selected,
Max Idle Time
to connect/disconnect
function as
Connect
Max Idle Time
because some
25

Advertisement

Table of Contents
loading

Table of Contents