Lan - TP-Link TL-WR940N User Manual

Chapter 4
address in this field. Click
port to the factory default value.
• Your PC's MAC Address
managing the router. If the MAC address is required, you can click
and this MAC address will be filled in the
Note:
• You can only use the MAC Address Clone function for PCs on the LAN.
• If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect
until the connection is re-established.
4. 4. 3.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Configure the IP parameters of the LAN and click Save.
• MAC Address
• IP Address
default - 192.168.0.254).
• Subnet Mask
255.255.255.0 is used as the subnet mask.
• IGMP Proxy
watch TV on IPTV-supported devices on the LAN .
Note:
• If you have changed the IP address, you must use the new IP address to log in.
• If the new IP address you set is not in the same subnet as the old one, the IP address pool in the DHCP
Server will be configured automatically, but the Virtual Server and DMZ Host will not take effect until they
are re-configured.
Downloaded from ManualsNet.com
Restore Factory MAC
- This field displays the MAC address of the PC that is

LAN

Network > LAN.
- The physical address of the LAN ports. The value can not be changed.
- Enter the IP address in dotted-decimal notation of your router (factory
- An address code that determines the size of the network. Normally
- The internet Group Management Protocol (IGMP) feature allow you to
search engine
Configure the Router in Standard Wireless Router
to restore the MAC address of WAN
WAN MAC Address field.
Clone MAC Address
26