Wireless Statistics; Throughput Monitor - TP-Link TL-WR940N User Manual

Chapter 6
6. 4. 5.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
client device connected to the router.
• MAC Address
• Current Status
• Received Packets
• Sent Packets
• Configure
•
•
6. 4. 6.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
• Rate
• Run Time
Downloaded from ManualsNet.com

Wireless Statistics

Wireless > Wireless Statistics
- The MAC address of the connected wireless client.
- The running status of the connected wireless client.
- Packets received by the wireless client.
- Packets sent by the wireless client.
- The button is used for loading the item to the Wireless MAC Filtering list.
Allow - If the Wireless MAC Filtering function is enabled, click this button to
allow the client to access your network.
Deny - If the Wireless MAC Filtering function is enabled, click this button to
deny the client to access your network.

Throughput Monitor

Wireless > Throughput Monitor
- The unit for the Throughput.
- How long Throughput Monitor runs.
search engine
Configure the Router in Repeater Mode
to check the data packets sent and received by each
to view the wireless throughput information.
103