Dhcp Client List; Address Reservation - TP-Link TL-WR940N User Manual

Chapter 6
• Default Domain (Optional)
• Primary DNS (Optional)
• Secondary DNS (Optional)
provides two DNS servers.
Note:
• To use the DHCP server function of the router, you must configure all computers on the LAN as
an IP Address
• When you choose
6. 5. 2.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
• Client Name
• MAC Address
• Assigned IP
• Lease Time
expired, a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and show the
current attached devices, click Refresh.
6. 5. 3.
You can reserve an IP address for a specific client. When you specify a reserved IP
address for a PC on the LAN, this PC will always receive the same IP address each time
when it accesses the DHCP server.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
3. Click
Downloaded from ManualsNet.com
- Input the domain name of your network.
- Input the DNS IP address provided by your ISP.
- Input the IP address of another DNS server if your ISP
automatically.
Static IP in Network

DHCP Client List

DHCP > DHCP Client List
- The name of the DHCP client.
- The MAC address of the DHCP client.
- The IP address that the router has allocated to the DHCP client.
- The time of the DHCP client leased. After the dynamic IP address has

Address Reservation

DHCP > Address Reservation.
Add New and fill in the blank.
search engine
Configure the Router in Repeater Mode
> LAN, the DHCP Server function will be disabled.
to view the information of the clients connected to the router.
Obtain
105