Wireless Advanced - TP-Link TL-WR940N User Manual

Chapter 4
Done!
4. 5. 4.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
Downloaded from ManualsNet.com
4. Select
the list to access
5. Delete or disable all entries if there are any entries already.
6. Click
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-
00-07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Leave the status as Enabled.
4 ) Click
7. The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.

Wireless Advanced

Wireless > Wireless Advanced.
search engine
Configure the Router in Standard Wireless Router
Allow the stations specified by any enabled entries in
as the filtering rule.
Add New and fill in the blanks.
Save and click Back.
31