Address Reservation - TP-Link TL-WR940N User Manual

Chapter 5
• Client Name
• MAC Address
• Assigned IP
• Lease Time
expired, a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and show the
current attached devices, click Refresh.
5. 6. 3.
You can reserve an IP address for a specific client. When you specify a reserved IP
address for a PC on the LAN, this PC will always receive the same IP address each time
when it accesses the DHCP server.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Click
1 ) Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) of the client for which
2 ) Enter the IP address (in dotted-decimal notation) which you want to reserve for
3 ) Leave the
4 ) Click Save.
Downloaded from ManualsNet.com
- The name of the DHCP client.
- The MAC address of the DHCP client.
- The IP address that the outer has allocated to the DHCP client.
- The time of the DHCP client leased. After the dynamic IP address has

Address Reservation

DHCP > Address Reservation.
Add New and fill in the blank.
you want to reserve an IP address.
the client.
Status as Enabled.
search engine
Configure the Router in Access Point Mode
86