Network; Wan - TP-Link TL-WR940N User Manual

Chapter 4
4. 4.
4. 4. 1.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Configure the IP parameters of the LAN and click Save.
Dynamic IP
If your ISP provides the DHCP service, please select
automatically get IP parameters from your ISP.
Click Renew
Click Release
• MTU Size
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
• Use These DNS Servers
Use These DNS Servers
the DNS servers will be assigned dynamically from your ISP.
• Host Name
• Get IP with Unicast DHCP
applications. If you cannot get the IP address normally, you can choose this option. (It
is rarely required.)
Downloaded from ManualsNet.com

Network

WAN

Network > WAN.
to renew the IP parameters from your ISP.
to release the IP parameters.
- The normal MTU (Maximum Transmission Unit) value for most Ethernet
- If your ISP providess you one or two DNS addresses, select
and enter the primary and secondary addresses. Otherwise,
- This option specifies the name of the router.
- A few ISPs' DHCP servers do not support the broadcast
search engine
Configure the Router in Standard Wireless Router
Dynamic IP, and the router will
18