The Back Panel - TP-Link TL-WR940N User Manual

Chapter 1
Blinking quickly
1. 2. 2.
The following parts (view from left to right) are located on the rear panel.
Power On/Off Button
Reset Button
Wi-Fi/WPS Button
Internet Port
Ethernet Ports (1/2/3/4)
Downloaded from ManualsNet.com
Status
WPS connection is in progress. This may take up to 2 minutes.

The Back Panel

Item
Power Port For connecting the router to a power socket via the provided power adapter.
Press this button to power on or off the router.
Press and hold this button until the LED blinks to restore the router to its
factory default settings.
Press this button for more than 5 seconds to turn on or off the wireless
function of the router.
To enable the WPS function, press and hold this button for 1 second. If you
have a WPS-supported device, you can press this button to quickly establish
connection between the router and the client device and automatically
configure wireless security for your wireless network.
For connecting to a DSL/Cable modem, or an Ethernet port.
For connecting your PCs or other wired network devices to the router.
Used for wireless operation and data transmitting. Upright them for the best
Antennas
Wi-Fi performance.
search engine
Get to Know About Your Router
Indication
Description
4