Working Mode; Network; Lan - TP-Link TL-WR940N User Manual

Chapter 6
•
•
•
•
• Traffic Statistics
•
•
•
•
• System Up Time
reset.
Click Refresh
6. 2.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
3. Select
6. 3.
6. 3. 1.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to
3. Configure the IP parameters of the LAN and click Save.
Downloaded from ManualsNet.com
Channel - The current wireless channel.
Mode - The current wireless working mode.
Channel Width - The current wireless channel width.
MAC Address - The physical address of the router.
- The router's traffic statistics.
Received (Bytes) - Traffic in bytes received from the WAN port.
Received (Packets) - Traffic in packets received from the WAN port.
Sent (Bytes) - Traffic in bytes sent out from the WAN port.
Sent (Packets) - Traffic in packets sent out from the WAN port.
- The length of the time since the router was last powered on or
to get the latest status and settings of the router.

Working Mode

Working Mode.
Repeater as needed and click Save.

Network

LAN

Network > LAN.
search engine
Configure the Router in Repeater Mode
96