Mac Clone; Wireless; Basic Settings - TP-Link WR841HPV5 User Manual

Chapter 4
• IGMP Version - Select the IGMP(Internet Group Management Protocol) Proxy Version,
either V2 or V3, according to your ISP.
• IPTV - Select to enable the IPTV feature.
• Mode - Select the appropriate mode according to your ISP.
• LAN 1/2/3/4 - Assign your LAN port to whether function as the Internet supplier or as
the IPTV supplier.
4. 3. 4.

MAC Clone

1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to Network > MAC
3. Configure the WAN MAC address and click Save.
• WAN MAC Address
If your ISP requires you to register the MAC address, please enter the correct MAC
address in this field. Click
port to the factory default value.
• Your PC's MAC Address
managing the router. If the MAC address is required, you can click
and this MAC address will be filled in the
Note:
• You can only use the MAC Address Clone function for PCs on the LAN.
• If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect
until the connection is re-established.
4. 4.

Wireless

4. 4. 1.

Basic Settings

1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to Wireless > Basic
3. Configure the basic settings for the wireless network and click Save.
Clone.
- This field displays the current MAC address of the WAN port.
Restore Factory MAC
- This field displays the MAC address of the PC that is
WAN MAC Address
Settings.
Configure the Router in Standard Wireless Router
to restore the MAC address of WAN
field.
Clone MAC Address
28