Table of Contents
Advertisement
Chapter 4
•
End IP Address
- Specify an IP address for the DHCP Server to end with when assigning
IP addresses.
•
Address Lease Time
will be allowed to connect to the router with the current dynamic IP Address. When
time is up, the user will be automatically assigned a new dynamic IP address.
•
Default Gateway (Optional)
the router.
•
Default Domain (Optional)
•
DNS Server (Optional)
•
Secondary DNS Server (Optional)
ISP provides two DNS servers.
Note:
• To use the DHCP server function of the router, you must configure all computers on the LAN as
an IP Address
automatically.
• When you choose
Smart IP (DHCP)
see the page as below.
4. 8. 2.
DHCP Client List
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
DHCP
>
DHCP Client List
the router.
•
Client Name
- The name of the DHCP client.
- The Address Lease Time is the amount of time a network user
- It is suggested to input the IP address of the LAN port of
- Input the domain name of your network.
- Input the DNS IP address provided by your ISP.
- Input the IP address of another DNS server if your
in
Network
> LAN, the DHCP Server function will be disabled. You will
to view the information of the clients connected to
Obtain
36
Advertisement
Table of Contents
