Table of Contents
Advertisement
Chapter 4
4. 1.
Use Quick Setup Wizard
The Quick Setup wizard will guide you through the process to set up your device.
Tips:
If you need the IPv6 internet connection, please refer to the section of
Follow the steps below to set up your router.
1. Visit http://tplinkwifi.net, and log in with the password you set for your device.
2. Click
Quick Setup
to connect your device to the internet.
Note:
1. If you have changed the preset wireless network name (SSID) and wireless password during the Quick Setup process,
all your wireless devices must use the new SSID and password to connect to the router.
2. Once you complete the
Quick Setup
create your mesh Wi-Fi system.
4. 2.
Configure the Device in Router Mode
4. 2. 1.
Connect the Hardware
If you already have a modem or your internet comes directly from an Ethernet wall
outlet, you can set up the device to work as a regular router.
If your internet connection is through an Ethernet cable directly from the wall instead
of through a DSL / Cable / Satellite modem, directly connect the Ethernet cable to
WAN/LAN port on the AP device, then follow step 4 and 5 to complete the hardware
connection.
To switch to router mode:
1. Unplug your modem, and remove the backup battery if it has one.
2. Connect the powered-off modem to the WAN/LAN port on the AP device with an
Ethernet cable.
3. Turn on the modem and then wait about 2 minutes for it to restart.
on the top of the page. Then follow the step-by-step instructions
process, the device become your mesh Wi-Fi controller, you can add agent to
POWER
WAN/LAN
LAN1
LAN2
RESET
WAN/LAN
Ethernet Cable
Set Up Internet Connection
Set Up an IPv6 Internet
Connection.
Internet
Modem
12
Hide quick links:
Advertisement
Table of Contents
