Treatment Of Cable Shield External Conductor - Mitsubishi Electric MELSERVO-J3 Series Manual

4. SIGNALS AND WIRING

4.9 Treatment of cable shield external conductor

In the case of the CN2 and CN6 connectors, securely connect the shielded external conductor of the cable to
the ground plate as shown in this section and fix it to the connector shell.
External conductor Sheath Core Sheath
External conductor
Pull back the external conductor to cover the sheath.
Strip the sheath.
(1) For CN6 connector (3M connector)
Screw
Cable
Screw
Ground plate
(2) For CN2 connector (3M or Molex connector)
Cable
Ground plate
Screw
4 - 36