Back Support; Angle Adjustment Via Gas Spring - Meyra Polaro II 1.745 Operating Manual

BACK SUPPORT

Angle adjustment via gas spring

The back support angle is sleeplessly
adjustable over a gas spring from -9°
to +30°.
Attention:
During the angle adjustment both
!
push handles are to be pushed
down evenly, otherwise there is a
danger of tilting!
1. Engage parking brake. – This pre-
vents the wheelchair from rolling
away accidentally.
2. To adjust the angle of the back sup-
port (1) simultaneously press the
activation lever (2) of each push
handle toward the back.
Adjust the back support angle
evenly over the push handles.
3. Release both activation levers (2)
and check the secure hold of the
back support (1).
Attention:
An angle adjustment increases the
!
danger of tilting and may only be
carried out with mounted support
castors swivelled toward the back!
•
Observe the safety information <
Mechanical wheelchairs >!
☞
Note:
The adjustment should only be car-
ried out under the weight of the
user.
32
2
1
2