Table of Contents
Advertisement
SEAT
Special safety information
Only drive on slopes, inclines and ob-
stacles in the basic position of the seat
height adjustment and the standing resp.
lying function. – Danger of overturning!
Seat pad
The seat pad [1] is attached to the seat plate
with velcro straps and can be removed for
cleaning and maintenance.
Replace and attach the seat pad again after
cleaning or maintenance [1]. – Velcro fasten-
er.
Seat inclination
Any change to the seat inclination will
lead to different driving behaviour!
Only adjust the seat angle [2] when the
electric wheelchair is standing on a hori-
zontal, level surface. A danger of tipping
over exists on gradients.
The seat-angle adjustment is linked with
an automatic speed reduction function.
An increased danger of tipping over exists
with a reclined back support.
Before driving make sure that you have
not adjusted a negative seat inclination,
resp. that the seat inclination ensures a
safe sitting position even while driving on
hills/slopes.
1
2
Electrically adjusting the seat angle
The seat inclination [2] is administrated
through the operating module or a sepa-
rate adjustment module.
☞ Therefore observe operation manual
< Operating module >.
☞ Watch for possible jamming areas!
35
Advertisement
Table of Contents
