Concluding The Adjustment Modus; Quick Reset To Standard Values - Meyra Optimus Service Manual

CONCLUDING THE ADJUSTMENT MODUS

In order to conclude the adjustment modus and switch
back into the driving modus the same keys are pressed
in the same sequence as when starting the adjustment
modus:
– (while the vehicle is switched on:) Press the lower
and the right service-key (fig. 6–19/ 12) simultane-
ously and keep the pressed.
– Additionally press the left service-key (fig. 6–19/ 13)
and release it again. – This switches the wheelchair
off.
– Then release all keys. – After the next switching on
the display will show 0.0 KMH after the initialisa-
tion as a signal that the adjustment modus has been
deactivated and that you have returned to the nor-
mal driving operation.

QUICK RESET TO STANDARD VALUES

Should you have lost the overview during the adjust-
ments, it is possible with an easy way to reset to the
standard manufacturer values and at the same time
exit the adjustment modus again.
Initial situation
The adjustment modus was activated and to adjust the
driving behaviour parameters the P1-P5-key was pres-
sed. This is evident through the lighting up of one of
the LEDs marked P1 to P5.
Measure
– For quick adjustment repeatedly press the P1-P5-key
(fig. 6–20/ 14). – The display shows HHH.
– Then simultaneously press the up-key (fig. 6–21/ 15)
and the down-key (fig. 6–21/ 16). – The display im-
mediately shows 0.0 KMH. The adjustment modus
was ended automatically through the key combina-
tion and the vehicle has switched to the normal driv-
ing operation. The vehicle now drives with the man-
ufacturers standard parameter settings again.
13
6–19
6–20
15
6–21
12
14
16
37