Ricoh PRIPORT VT 2000 Series Service Manual page 29

28 February '91
1.2 OVERALL: VT2100/VT2130/VT2150
[J]
[J]: 2nd Original Transport Rollers
[K]: Exposure Glass
[L]: Fluorescent Lamp
[H]: Original Registration Sensor
The original [I] set on the original table is detected by the 2nd original
sensor [F]. At the same time, the 1st original transport rollers [G] and 2nd
original transport rollers [J] start rotating and feed the original to the original
start position where is 12 mm far from the guide plate. The original
transport rollers start rotating again after the drum section completes the
preparation for the master making.
[I]
[K] [L]
2-2
[G]
[H] [F]