Ricoh PRIPORT VT 2000 Series Service Manual page 253

28 February '91
7.3 PAPER FEED ROLLER PRESSURE ADJUSTMENT
Purpose: To ensure that the paper feed roller exerts sufficient pressure for
smooth printing paper feed (weight range 50 g/m
<Step 1>
1. Loosen the screw [A] securing the lower adjusting plate [B].
NOTE: When loosing the screw, hold the lower adjusting plate in the
original position for fine adjustment.
2. Adjust the paper feed roller pressure by moving the lower adjusting plate
[B] up/down.
Up
Down : Reduce the pressure
[B]
: Increase the pressure
[A]
5-40
2 to 215 g/m 2 ).