Ricoh PRIPORT VT 2000 Series Service Manual page 256

7.5 LOWER GUIDE PLATE ADJUSTMENT
Purpose: To ensure a smooth paper feed excluding paper jams, folds, or
wrinkles.
1. Make sure that the distance between the lower guide plate [A] and the
lower second feed roller [B] is 0 to 0.1 mm as shown.
2. If incorrect, remove both front and rear covers and loosen the screws
[C]on both sides. Then, adjust the distance by lowering and raising the
lower guide plate.
3. After adjustment, retighten the screws [C].
[C]
5-43
28 February '91
[A]
0 -- 0.1 mm
[A] [A]
[B]
[B]