Ricoh PRIPORT VT 2000 Series Service Manual page 222

28 February '91
2.7 1ST ORIGINAL SENSOR REPLACEMENT: VT2300/2500
[D]
[E]
[F]
[E]
[B]
[C]
[I]
[A]
[H]
1. Remove the screw securing the stopper [A] (1 screw).
2. Remove the platen plate [B] (2 screws).
3. Remove the original guide [C] (4 screws).
4. Remove the ADF unit cover [D] (5 screws).
5. Unhook the both hook springs [E].
6. Remove the separation guide plate [F] (4 screws).
7. Remove the separation blade assembly [H] (1 screw).
8. Disconnect the 1st original sensor connector [I].
9. Remove the sensor from the sensor bracket.
5-9