Ricoh PRIPORT VT 2000 Series Service Manual page 95

28 February '91
No. Item
6 Gap between
the
designated
area and
neighboring
image. (Gap
between two
designated
areas.)
Sample of Problem
Designated area Area recognized
When the gap Depending on
between the the original
designated feed condition
area and (registration
neighboring and skewing)
image is too or handwriting
small. ability the
designated
area, the
neighboring
image may or
may not be
recognized as
a designated
area.
Preferred designated area
2 mm 2 mm
(Image in the designated area)
1) There should be more than 2
mm clearance between
designated areas.
2) Mark the line away from the
image in the designated area
move than 2 mm to recognized
the image completely.
3) For consideration of the
handwriting ability, approximately
5 mm is needed as a gap.
2-68
2 mm
2 mm