Ricoh PRIPORT VT 2000 Series Service Manual page 164

No. Item
Pressure
10
Cam
Rear
Paper
Delivery
Side Plate
11
Main
12 Control
Board
The shape of the VT2000 pressure cam has been
modified slightly as shown to decrease the pressure
roller speed to 70% that of the SS900 series. (A portion
at point [A] has been shaved off.) This reduces the
noise caused when the pressure roller moves against
the drum.
SS900 series cam
One of the air slots [B] cut in the rear paper delivery
side plate has been enlarged so that tape strips from
the optional tape dispenser can be inserted through it.
SS900 series
An ON/OFF control circuit for the thermal head drive
voltage (VHD) has been added to the main control
board.
The drum master detection circuit on the main control
board has been modified to accommodate the new
drum master sensor.
Remarks
VT2000 series cam
2-137
28 February '91
VT2000 series
[B]
[A]