Ricoh PRIPORT VT 2000 Series Service Manual page 302

Component
Paper Table Height
Sensor
Paper End Sensor
Pressure Sensor
First Paper Exit
Sensor
Second Paper Exit
Sensor
Paper Feed Solenoid
Drum Rotation Sensor
Master End Sensor
Condition
When the paper feed table goes up, it does not
ON condition
stop at the proper position and E-02 lights.
(Interrupted)
The paper feed table does not go up. When
OFF condition
printing starts, jam indicators "B" and
(Not interrupted)
When there is no paper on the paper feed table,
ON condition the Print Start key can be activated, but jam
(Not interrupted) indicators "B" and
Though there is paper on the paper table, paper
OFF condition
end indicators "B" and
(Not interrupted)
After one sheet of paper is printed, the machine
ON condition stops. At that time, the counter does not count
(Interrupted) down and jam indicators "B" and
When the main switch is turned on, jam indicators
OFF condition
"B" and
(Not interrupted)
When the main switch is turned on, the machine
ON condition
stops and jam indicators "G" and
(Paper exists)
OFF condition After one sheet of paper is printed, the machine
(Paper does not stops and jam indicators "B", "E", and
exist)
When the main switch is turned on, jam indicators
ON condition
"G" and
(Paper exists)
OFF condition After one sheet of paper is printed, the machine
(Paper does not stops and jam indicators "E" and
exist)
The paper is not fed and jam indicators "B" and
OFF condition
blink.
The drum begins to rotate when the main switch
ON condition is turned on. E06 lights when the Master Making
(Interrupted) key is pressed or when the Print Start key is
pressed.
The drum begins to rotate when the main switch
OFF condition is turned on. E06 lights when the Master Making
(Not interrupted) key is pressed or when the Print Start key is
pressed.
Normal operation when master is present.
Master end is not detected; Master End indicators
ON condition
"C" and
(Actuated)
and
Even if the master is present, the Master End
OFF condition
indicators "C" and
(Not actuated)
Phenomenon
blink and cannot be reset.
blink.
do not blink and jam indicators "C"
blink.
7-3
28 February '91
blink.
blink.
blink.
blink.
blink.
blink.
blink.
blink.