Ricoh PRIPORT VT 2000 Series Service Manual page 179

28 February '91
7. Loading Paper on the Paper Feed Ta-
ble
a. Open the paper feed table.
b. Stack the paper neatly on the paper
feed table.
c. Position the paper feed side plates
so that they lightly contact the paper
on both sides.
d. Position the paper delivery table for
the printing paper size, using the
scale on the table.
e. Position the paper delivery side
plate for the printing paper size, us-
ing the scale on the table.
8. Installing the Master Roll (Type VT-M)
a. While lifting up on the release lever,
slide the scanner unit to the left.
b. Attach a spool to each end of the
master roll.
c. Set the master roll in the machine.
NOTE: The vinyl side faces down.
d. Return the pressure release lever to
the original position.
e. Plug in the power cord and turn on
the main switch.
f. Press the Master Cut button.
g. Remove the cut master paper.
NOTE: Please confirm that the
master paper is not bent or
creased.
h. Close the scanner unit.
3-8