Initial Check - Ricoh PRIPORT VT 2000 Series Service Manual

28 February '91

10.8 INITIAL CHECK

When the main switch is turned on, the CPU checks the ON/OFF status
of the sensors listed below. If a sensor is ON, the letter on the Jam
indicator corresponding to the sensor blinks:
Master Eject Sensor........................ F
Master Buckle Sensor ..................... C
2nd Original Sensor ........................ A
Original Registration Sensor .......... A
1st/2nd Paper Exit Sensor ............. G
Printing Pressure Sensor ................................. E
10.9 MAIN MOTOR SOFT START
The main motor turns at 60 rpm for the first print (not trial print) made
from a new master. The printing speed then gradually increases with
each rotation until the standard printing speed is reached.
2-134