Ricoh PRIPORT VT 2000 Series Service Manual page 93

28 February '91
2.11.6 Recognition of Designated Area: VT2500 only
As the required image may differ depending on how the designated area is
entered, make the command sheet by referring to the following.
No. Item
1 Form of the
designated
area
2 Non-closed
line
Sample of Problem
Designated area Area recognized
Serial pattern The designated
area is
recognized as
follows:
Double circle Only the outer
pattern. circle will be
recognized as
follows:
The designated The designated
area is not a area is not
closed loop. recognized.
Preferred designated area
Separation the area to be
designated as follows:
Make a gap in the pattern.
Designate the area by a closed
loop.
2-66
Make a space
more than 2
mm.
Make a space
more than 2
mm.
Designate area
by a closed line.