Ricoh PRIPORT VT 2000 Series Service Manual page 214

1. EXTERIOR
1.1 EXTERIOR COVER REPLACEMENT
[E]
When adjusting or disassembling each sections, refer to the following
procedure of how to remove the exterior covers.
[A] Master feed unit cover (2 screws). Slide the scanner unit to the left.
[B] Front cover (6 screws).
•
Remove master feed unit cover [A] to remove upper right screw. Open the
front door to remove the front screws.
[C] Rear cover (6 screws).
[D] Operation panel cover (6 screws).
•
Remove front cover [B] to remove operation panel cover.
[E] Front and rear fluorescent lamp covers (2 screws each).
[F] Master eject cover (2 screws).
[F]
[B]
[D]
5-1
28 February '91
[E]
[A]
[C]