Ricoh PRIPORT VT 2000 Series Service Manual page 241

28 February '91
5.6 MASTER BUCKLE SENSOR REPLACEMENT
1. Turn off the main switch.
2. Slide the scanner unit to the left.
3. Remove the master roll.
4. Remove the cutter unit [A] (2 screws).
5. Disconnect the buckle sensor connector [B].
6. Remove the buckle sensor [C] together with the bracket [D] (2 screws).
7. Remove the buckle sensor from the bracket (2 screws).
[B]
[C]
[A]
[D]
5-28