Related Manuals - Omron CJ Series Operation Manual

Related Manuals

The following manuals are related to the NJ-series Controllers. Use these manuals for reference.
Manual name
NJ-series CPU Unit Hard-
ware User's Manual
NJ-series CPU Unit Software
User's Manual
Sysmac Studio Version 1
Operation Manual
CJ-series CompoNet Master
Unit Operation Manual for NJ-
series CPU Unit (this manual)
CompoNet Slave Units and
Repeater Unit Operation
Manual
CS/CJ-series CompoNet
Master Units Operation Man-
ual
CX-Integrator Version 2.@
Operation Manual
CJ-series CompoNet Master Unit Operation Manual for NJ-series CPU Unit (Cat. No. W493)
Cat. No. Model numbers
W500 NJ501-@@@@
NJ301-@@@@
W501 NJ501-@@@@
NJ301-@@@@
W504 SYSMAC-SE2@@@
W493 CJ1W-CRM21
W457 CRT1 Series
W456 CS1W-CRM21
CJ1W-CRM21
W464 ---
Application
Learning the basic speci- An introduction to the entire NJ-
fications of the NJ-series series system is provided along
CPU Units, including with the following information on
introductory information, the CPU Unit.
designing, installation,
• Features and system configura-
and maintenance. Mainly
tion
hardware information is
• Introduction
provided.
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
Use this manual together with the
NJ-series CPU Unit Software
User's Manual (Cat. No. W501).
Learning how to program The following information is pro-
and set up an NJ-series vided on a Controller built with an
CPU Unit. Mainly soft- NJ501 CPU Unit.
ware information is pro-
• CPU Unit operation
vided.
• CPU Unit features
• Initial settings
• Programming based on IEC
61131-3 language specifica-
tions
Use this manual together with the
NJ-series CPU Unit Hardware
User's Manual (Cat. No. W500).
Learning about the oper- Describes the operating proce-
ating procedures and dures of the Sysmac Studio.
functions of the Sysmac
Studio.
Learning the functions The functions and operating pro-
and operating procedures cedures of a CJ-series Compo-
of a CJ-series CompoNet Net Master Unit when it is used in
Master Unit when it is an NJ-series Controller are
used in an NJ-series described.
Controller
Learning about Compo- The models, functions, specifica-
Net Slave Units tions, operating procedures, and
other details are described.
Learning the functions The functions and operating pro-
and operating procedures cedures of a CS/CJ-series Com-
of a CS/CJ-series Com- poNet Master Unit when it is used
poNet Master Unit in an CS/CJ-series PLC are
described.
Learning about the CX- The operating procedures of the
Integrator Support Soft- CX-Integrator are described.
ware, which is used to set
up and commission a
CompoNet Network
Related Manuals
Description
37