Omron CJ Series Operation Manual page 116

4 Installation and Wiring
Flat Cable I
A DCN4-BR4 Flat Connector Plug is connected to the communications connector on the Master
Unit. Refer to 4-3 Preparing and Mounting Flat Connectors.
Orient the Connector so that the line colors are indicated (red, white, blue, and black) is facing to the
left and press in the Connector until it clicks into place.
Note To remove an inserted Connector, hold the latches on both sides, and pull out the Connector.
4-8 CJ-series CompoNet Master Unit Operation Manual for NJ-series CPU Unit (Cat. No. W493)