Omron CJ Series Operation Manual page 132

4 Installation and Wiring
(2) Squeeze firmly on the Pliers until the lock on the connector clicks into place.
Precautions for Correct Use Precautions for Correct Use
• Do not pressure-weld the connector cover at the edges.
• Do not pressure-weld the connector cover at the back of the pressure-welding block.
• Set the connector in the correct orientation.
(3) After attaching the cable, confirm that it is properly pressure-welded.
Preparing and Mounting DCN4-MR4 Flat Multi-wiring Connector
Plugs
• Component Names
Cover
Black
1
Attaching the Cable
(1) Confirm that the cable colors match the cable labels and then place the Cable on the
Plug.
(2) Close the cover to sandwich the cable and secure the hooks.
4-24
OK
NG
Be sure there are no gaps here.
Cable labels
(Black, blue/green, white, and red)
CJ-series CompoNet Master Unit Operation Manual for NJ-series CPU Unit (Cat. No. W493)
NG
NG
Housing
Plug with the Cable
Connected to It