Round Cable Ii - Omron CJ Series Operation Manual

Name Appearance
Flat Connector
Plug
Flat Multi-wiring
Connector Plug
Tools Required
Name Appearance
Special Tool
(Pliers)
Special Tool
(Pliers)

4-3-1 Round Cable II

A Flat Connector must be mounted on a Round Cable II cable only when a Terminating Resistor is
attached to it.
Preparing and Mounting DCN4-TR4 Flat Connector Sockets
• Component Names
Cover
Cable confirmation slot
CJ-series CompoNet Master Unit Operation Manual for NJ-series CPU Unit (Cat. No. W493)
Model
DCN5-BR4
DCN4-MR4
Model
DWT-A01
DWT-A02
Cable labels
(Black, blue/green, white, and red)
Black
4 Installation and Wiring
Application
Used as a set with the DCN5-TR4 Flat Connector Socket in
the following applications:
• Extending the trunk line or sub-trunk lines.
• T-branching branch lines from the trunk line or sub-trunk
lines.
• T-branching sub-branch lines from a branch line.
Used independently to connect Communications Cable to a
Unit.
Used independently for the following applications:
• Making a multidrop connection from the communications
cable to a Unit.
* This Connector can be used with the following Units.
Bit Slave Units with Small Connectors (CRT1B-@D0@JS(-
1))
Application
A pressure welding tool for a DCN4-TR4 Flat Connector
Socket and a DCN4-BR4 Flat Connector Plug or DCN4-
MR4 Flat Multi-wiring Connector.
A pressure welding tool for a DCN5-TR4 Flat Connector
Socket or a DCN5-BR4 Flat Connector Plug.
Housing
4
4-17