Omron CJ Series Operation Manual page 103

• Example for Flat Cable II
Attach a DCN5-BR4 Flat Connector Plug to a DCN5-TR4 Flat Connector Socket.
DCN5-TR4 Flat
Connector Socket
Note The same type of cable must be used for both the trunk line and the branch line.
Multidrop Connections
Round Cable I or Round Cable II (with an Open Type Connector)
M3 terminal block
Flat Cable I (with a Multidrop Connector)
DCN4-BR4
Flat Connector Plug
DCN4-MD4
Multidrop Connector
Slave Unit or Repeater Unit
Flat Cable II
Multidrop connections are not supported.
CJ-series CompoNet Master Unit Operation Manual for NJ-series CPU Unit (Cat. No. W493)
DCN5-BR4 Flat
Connector Plug
Slave Unit
DCN4-TB4 Open Type
Connector
Communications connector
Slave Unit or Repeater Unit
3 Wiring Configurations
3
3-15