15
Using the CX-Integrator, monitor the participation status of Slave Units.
(1) While online, upload the network configuration.
(2) Right-click the Master Unit in the Network Configuration Window, and select Monitor.
(3) Monitor Slave Unit participation status on the Slave Status Tab Page.
A list of node addresses will be displayed showing the participation status for each node:
participating (blue), disconnected (red), or not participating (gray).
(4) Monitor the status of all Master Unit communications on the Unit Status Tab Page.
CJ-series CompoNet Master Unit Operation Manual for NJ-series CPU Unit (Cat. No. W493)
1 Introduction
1
1-37