Omron CJ Series Operation Manual page 136

4 Installation and Wiring
Preparing and Mounting DCN5-BR4 Flat Connector Plugs
• Component Names
1
Cutting the Cable
Cut the cable perpendicular to the length.
To prevent short-circuits, use a sharp cutting tool such as nipper. Confirm there is no remaining
wire coming out.
2
Attaching the Cable
(1) Hold the cable with the white line facing up and near the cover opening
(Side with
cover opening)
(2) Hold the cable so that it does not move and close the cover.
4-28
Cover
White line
From the left: red, white, blue, and black
CJ-series CompoNet Master Unit Operation Manual for NJ-series CPU Unit (Cat. No. W493)